The Series 1600 pump line has been designed for maximum versatility and is ideally suited for corrosive waste sump applications, tank car unloading and other demanding services. The casing has been designed with generous proportions in the recirculation chamber to provide short priming times without the use of troublesome flappers and check valves. The inlet has been sized to minimize NPSH requirements to provide greater allowable suction lifts. The pumps are typical supplied with flat faced flanges dimensioned according to ANSI/ASME B16.5 class 150, and they are also available with ISO/DIN and JIS flanges. The pump’s flexible stuffing box design accepts a wide variety of shaft sealing configurations to suit the needs of specific applications, including both outside and double inside mechanical seals. For additional corrosion-resistance, the entire pump and drive unit is mounted on a Fybroc fiberglass baseplate. When weight and space needs arecritical, the pump is also available in a close-couple configuration as a Series 1630.
The corrosion resistant Series 1600 self-primers combine efficiency with excellent priming times and feature substantial parts interchangeability with Series 1500 pumps. Six sizes are available.
Application:
- Chemical Processing
- Electric Utilities
- Pulp and Paper
- Electronics
- Scrubbers
- Aquariums/Aquaculture
- Desalination/Water Reuse
- Reverse Osmosis
- Commercial Marine/Navy
Key Features
- Capacities to 1400 GPM (320 m3/hr)
- Heads to 300 feet (95 m)
- Working temperatures to 250°F (121°C) for VR-1, 275°F (135°C) for EY-2
- Working pressures to 175 PSI (1,207 kPa)
- Fiberglass reinforced plastic (FRP) construction
- VR-1, BPO-DMA and EY-2 materials
- Replaceable volute extension
- FRP baseplates available
- High strength casing with integral 150 lb FF flanges
- ISO/DIN/JIS flange configuration available
